CheckTriggeredElementChange(x, y, element, CE_CREATION_OF_X);
}
-static inline void InitField_WithBug1(int x, int y, boolean init_game)
+inline static void InitField_WithBug1(int x, int y, boolean init_game)
{
InitField(x, y, init_game);
InitMovDir(x, y);
}
-static inline void InitField_WithBug2(int x, int y, boolean init_game)
+inline static void InitField_WithBug2(int x, int y, boolean init_game)
{
int old_element = Feld[x][y];
int initial_move_dir = MV_DOWN;
int i, j, x, y;
- game_status = GAME_MODE_PLAYING;
+ // required here to update video display before fading (FIX THIS)
+ DrawMaskedBorder(REDRAW_DOOR_2);
- StopAnimation();
+ game_status = GAME_MODE_PLAYING;
if (!game.restart_level)
CloseDoor(DOOR_CLOSE_1);
else
FadeSetEnterScreen();
- if (CheckIfRedrawGlobalBorderIsNeeded())
+ if (CheckIfGlobalBorderHasChanged())
fade_mask = REDRAW_ALL;
FadeOut(fade_mask);
+ OpenDoor(GetDoorState() | DOOR_NO_DELAY | DOOR_FORCE_REDRAW);
+
ClearField();
DrawCompleteVideoDisplay();
BlitScreenToBitmap(backbuffer);
/* !!! FIX THIS (END) !!! */
+ DrawMaskedBorder(fade_mask);
+
FadeIn(fade_mask);
#if 1
{
UnmapGameButtons();
UnmapTapeButtons();
+
+ FreeGameButtons();
+ CreateGameButtons();
+
game_gadget[SOUND_CTRL_ID_MUSIC]->checked = setup.sound_music;
game_gadget[SOUND_CTRL_ID_LOOPS]->checked = setup.sound_loops;
game_gadget[SOUND_CTRL_ID_SIMPLE]->checked = setup.sound_simple;
+
MapGameButtons();
MapTapeButtons();
int frame_delay_value = (ffwd_delay ? FfwdFrameDelay : GameFrameDelay);
int wait_delay_value = (no_delay ? 0 : frame_delay_value);
- if (quick_relocation)
+ if (level.lazy_relocation && IN_VIS_FIELD(SCREENX(x), SCREENY(y)))
+ {
+ RedrawPlayfield();
+ }
+ else if (quick_relocation)
{
if (!IN_VIS_FIELD(SCREENX(x), SCREENY(y)) || center_screen)
{
}
}
- RedrawPlayfield(TRUE, 0,0,0,0);
+ RedrawPlayfield();
}
else
{
offset_y - MIDPOSY);
}
-
ScrollScreen(NULL, SCROLL_GO_ON); /* scroll last frame to full tile */
while (scroll_x != scroll_xx || scroll_y != scroll_yy)
{
/* !!! not clear why graphic animation should be reset at all here !!! */
/* !!! UPDATE: but is needed for correct Snake Bite tail animation !!! */
+ /* !!! SOLUTION: do not reset if graphics engine set to 4 or above !!! */
+
+ /*
+ GRAPHICAL BUG ADDRESSED BY CHECKING GRAPHICS ENGINE VERSION:
+
+ When using an animation frame delay of 1 (this only happens with
+ "sp_zonk.moving.left/right" in the classic graphics), the default
+ (non-moving) animation shows wrong animation frames (while the
+ moving animation, like "sp_zonk.moving.left/right", is correct,
+ so this graphical bug never shows up with the classic graphics).
+ For an animation with 4 frames, this causes wrong frames 0,0,1,2
+ be drawn instead of the correct frames 0,1,2,3. This is caused by
+ "GfxFrame[][]" being reset *twice* (in two successive frames) after
+ an element change: First when the change delay ("ChangeDelay[][]")
+ counter has reached zero after decrementing, then a second time in
+ the next frame (after "GfxFrame[][]" was already incremented) when
+ "ChangeDelay[][]" is reset to the initial delay value again.
+
+ This causes frame 0 to be drawn twice, while the last frame won't
+ be drawn anymore, resulting in the wrong frame sequence 0,0,1,2.
+
+ As some animations may already be cleverly designed around this bug
+ (at least the "Snake Bite" snake tail animation does this), it cannot
+ simply be fixed here without breaking such existing animations.
+ Unfortunately, it cannot easily be detected if a graphics set was
+ designed "before" or "after" the bug was fixed. As a workaround,
+ a new graphics set option "game.graphics_engine_version" was added
+ to be able to specify the game's major release version for which the
+ graphics set was designed, which can then be used to decide if the
+ bugfix should be used (version 4 and above) or not (version 3 or
+ below, or if no version was specified at all, as with old sets).
+
+ (The wrong/fixed animation frames can be tested with the test level set
+ "test_gfxframe" and level "000", which contains a specially prepared
+ custom element at level position (x/y) == (11/9) which uses the zonk
+ animation mentioned above. Using "game.graphics_engine_version: 4"
+ fixes the wrong animation frames, showing the correct frames 0,1,2,3.
+ This can also be seen from the debug output for this test element.)
+ */
+
/* when a custom element is about to change (for example by change delay),
do not reset graphic animation when the custom element is moving */
- if (!IS_MOVING(x, y))
+ if (game.graphics_engine_version < 4 &&
+ !IS_MOVING(x, y))
{
ResetGfxAnimation(x, y);
ResetRandomAnimationValue(x, y);
byte tape_action[MAX_PLAYERS];
int i;
- for (i = 0; i < MAX_PLAYERS; i++)
- {
- struct PlayerInfo *player = &stored_player[i];
-
- // allow engine snapshot if movement attempt was stopped
- if ((game.snapshot.last_action[i] & KEY_MOTION) != 0 &&
- (player->action & KEY_MOTION) == 0)
- game.snapshot.changed_action = TRUE;
-
- // allow engine snapshot in case of snapping/dropping attempt
- if ((game.snapshot.last_action[i] & KEY_BUTTON) == 0 &&
- (player->action & KEY_BUTTON) != 0)
- game.snapshot.changed_action = TRUE;
-
- game.snapshot.last_action[i] = player->action;
- }
-
/* detect endless loops, caused by custom element programming */
if (recursion_loop_detected && recursion_loop_depth == 0)
{
#endif
#endif
+ for (i = 0; i < MAX_PLAYERS; i++)
+ {
+ // allow engine snapshot in case of changed movement attempt
+ if ((game.snapshot.last_action[i] & KEY_MOTION) !=
+ (stored_player[i].effective_action & KEY_MOTION))
+ game.snapshot.changed_action = TRUE;
+
+ // allow engine snapshot in case of snapping/dropping attempt
+ if ((game.snapshot.last_action[i] & KEY_BUTTON) == 0 &&
+ (stored_player[i].effective_action & KEY_BUTTON) != 0)
+ game.snapshot.changed_action = TRUE;
+
+ game.snapshot.last_action[i] = stored_player[i].effective_action;
+ }
+
if (level.game_engine_type == GAME_ENGINE_TYPE_EM)
{
GameActions_EM_Main();