}
}
-static int getDirectionFromTube(int element)
+static int getOpenDirectionFromTube(int element)
{
switch (element)
{
return MV_NONE;
}
-static int getTubeFromDirection(int direction)
+static int getTubeFromOpenDirection(int direction)
{
switch (direction)
{
return EL_EMPTY;
}
-static int getTubeFromDirectionNotEmpty(int direction, int element_old)
+static int getTubeFromOpenDirectionNotEmpty(int direction, int element_old)
{
- int element_new = getTubeFromDirection(direction);
+ int element_new = getTubeFromOpenDirection(direction);
return (element_new != EL_EMPTY ? element_new : element_old);
}
-static int getMinimalConnectedTube(int x, int y)
+static int getOpenDirectionFromBelt(int element)
+{
+ int belt_dir = getBeltDirFromBeltElement(element);
+
+ return (belt_dir == MV_LEFT ? MV_RIGHT :
+ belt_dir == MV_RIGHT ? MV_LEFT :
+ belt_dir == MV_NONE ? MV_HORIZONTAL : belt_dir);
+}
+
+static int getBeltFromNrAndOpenDirection(int nr, int direction)
+{
+ int belt_dir = (direction == MV_LEFT ? MV_RIGHT :
+ direction == MV_RIGHT ? MV_LEFT :
+ direction == MV_HORIZONTAL ? MV_NONE : direction);
+
+ if (direction == MV_NONE)
+ return EL_EMPTY;
+
+ return getBeltElementFromBeltNrAndBeltDir(nr, belt_dir);
+}
+
+static int getBeltFromNrAndOpenDirectionNotEmpty(int nr, int direction,
+ int element_old)
+{
+ int element_new = getBeltFromNrAndOpenDirection(nr, direction);
+
+ return (element_new != EL_EMPTY ? element_new : element_old);
+}
+
+static int getOpenDirectionFromPool(int element)
+{
+ switch (element)
+ {
+ case EL_ACID_POOL_TOPLEFT: return (MV_DOWN | MV_RIGHT);
+ case EL_ACID_POOL_TOPRIGHT: return (MV_DOWN | MV_LEFT);
+ case EL_ACID_POOL_BOTTOMLEFT: return (MV_UP | MV_RIGHT);
+ case EL_ACID_POOL_BOTTOMRIGHT: return (MV_UP | MV_LEFT);
+ case EL_ACID_POOL_BOTTOM: return (MV_HORIZONTAL | MV_UP);
+ case EL_ACID: return (MV_HORIZONTAL | MV_DOWN);
+ }
+
+ return MV_NONE;
+}
+
+static int getPoolFromOpenDirection(int direction)
+{
+ switch (direction)
+ {
+ case (MV_DOWN | MV_RIGHT): return EL_ACID_POOL_TOPLEFT;
+ case (MV_DOWN | MV_LEFT): return EL_ACID_POOL_TOPRIGHT;
+ case (MV_UP | MV_RIGHT): return EL_ACID_POOL_BOTTOMLEFT;
+ case (MV_UP | MV_LEFT): return EL_ACID_POOL_BOTTOMRIGHT;
+ case (MV_HORIZONTAL | MV_UP): return EL_ACID_POOL_BOTTOM;
+ case (MV_HORIZONTAL | MV_DOWN): return EL_ACID;
+ }
+
+ return EL_EMPTY;
+}
+
+static int getPoolFromOpenDirectionExt(int direction, int help_element)
+{
+ int element = getPoolFromOpenDirection(direction);
+ int help_direction = getOpenDirectionFromPool(help_element);
+
+ if (element == EL_EMPTY)
+ {
+ int help_direction_vertical = help_direction & MV_VERTICAL;
+
+ element = getPoolFromOpenDirection(direction | help_direction_vertical);
+ }
+
+ if (element == EL_EMPTY)
+ {
+ int help_direction_horizontal = help_direction & MV_HORIZONTAL;
+
+ element = getPoolFromOpenDirection(direction | help_direction_horizontal);
+ }
+
+ return element;
+}
+
+static int getPoolFromOpenDirectionNotEmpty(int direction, int element_old)
+{
+ int element_new = getPoolFromOpenDirectionExt(direction, element_old);
+
+ return (element_new != EL_EMPTY ? element_new : element_old);
+}
+
+static int getOpenDirectionFromPillar(int element)
+{
+ switch (element)
+ {
+ case EL_EMC_WALL_1: return (MV_DOWN);
+ case EL_EMC_WALL_2: return (MV_VERTICAL);
+ case EL_EMC_WALL_3: return (MV_UP);
+ }
+
+ return MV_NONE;
+}
+
+static int getPillarFromOpenDirection(int direction)
+{
+ switch (direction)
+ {
+ case (MV_DOWN): return EL_EMC_WALL_1;
+ case (MV_VERTICAL): return EL_EMC_WALL_2;
+ case (MV_UP): return EL_EMC_WALL_3;
+ }
+
+ return EL_EMPTY;
+}
+
+static int getPillarFromOpenDirectionNotEmpty(int direction, int element_old)
+{
+ int element_new = getPillarFromOpenDirection(direction);
+
+ return (element_new != EL_EMPTY ? element_new : element_old);
+}
+
+static int getClosedTube(int x, int y)
{
static int xy[4][2] =
{
{ 0, +1 }
};
int element_old = IntelliDrawBuffer[x][y];
- int tube_direction_old = getDirectionFromTube(element_old);
+ int tube_direction_old = getOpenDirectionFromTube(element_old);
int tube_direction_new = MV_NONE;
int i;
if (IN_LEV_FIELD(xx, yy) && IS_TUBE(IntelliDrawBuffer[xx][yy]) &&
(tube_direction_old & dir) &&
- (getDirectionFromTube(IntelliDrawBuffer[xx][yy]) & dir_opposite))
+ (getOpenDirectionFromTube(IntelliDrawBuffer[xx][yy]) & dir_opposite))
tube_direction_new |= dir;
}
- return getTubeFromDirectionNotEmpty(tube_direction_new, element_old);
+ return getTubeFromOpenDirectionNotEmpty(tube_direction_new, element_old);
+}
+
+static int getClosedBelt(int x, int y)
+{
+ static int xy[4][2] =
+ {
+ { -1, 0 },
+ { +1, 0 },
+ { 0, -1 },
+ { 0, +1 }
+ };
+ int element_old = IntelliDrawBuffer[x][y];
+ int belt_nr = getBeltNrFromBeltElement(element_old);
+ int belt_direction_old = getOpenDirectionFromBelt(element_old);
+ int belt_direction_new = MV_NONE;
+ int i;
+
+ for (i = MV_BIT_LEFT; i <= MV_BIT_RIGHT; i++)
+ {
+ int xx = x + xy[i][0];
+ int yy = y + xy[i][1];
+ int dir = MV_DIR_FROM_BIT(i);
+ int dir_opposite = MV_DIR_OPPOSITE(dir);
+
+ if (IN_LEV_FIELD(xx, yy) && IS_BELT(IntelliDrawBuffer[xx][yy]) &&
+ (belt_direction_old & dir) &&
+ (getOpenDirectionFromBelt(IntelliDrawBuffer[xx][yy]) & dir_opposite))
+ belt_direction_new |= dir;
+ }
+
+ return getBeltFromNrAndOpenDirection(belt_nr, belt_direction_new);
+}
+
+static int getClosedPool(int x, int y)
+{
+ static int xy[4][2] =
+ {
+ { -1, 0 },
+ { +1, 0 },
+ { 0, -1 },
+ { 0, +1 }
+ };
+ int element_old = IntelliDrawBuffer[x][y];
+ int pool_direction_old = getOpenDirectionFromPool(element_old);
+ int pool_direction_new = MV_NONE;
+ int i;
+
+ for (i = 0; i < NUM_DIRECTIONS; i++)
+ {
+ int xx = x + xy[i][0];
+ int yy = y + xy[i][1];
+ int dir = MV_DIR_FROM_BIT(i);
+ int dir_opposite = MV_DIR_OPPOSITE(dir);
+
+ if (IN_LEV_FIELD(xx, yy) &&
+ IS_ACID_POOL_OR_ACID(IntelliDrawBuffer[xx][yy]) &&
+ (pool_direction_old & dir) &&
+ (getOpenDirectionFromPool(IntelliDrawBuffer[xx][yy]) & dir_opposite))
+ pool_direction_new |= dir;
+ }
+
+ return getPoolFromOpenDirectionNotEmpty(pool_direction_new, element_old);
+}
+
+static int getClosedPillar(int x, int y)
+{
+ static int xy[4][2] =
+ {
+ { -1, 0 },
+ { +1, 0 },
+ { 0, -1 },
+ { 0, +1 }
+ };
+ int element_old = IntelliDrawBuffer[x][y];
+ int pillar_direction_old = getOpenDirectionFromPillar(element_old);
+ int pillar_direction_new = MV_NONE;
+ int i;
+
+ for (i = MV_BIT_UP; i <= MV_BIT_DOWN; i++)
+ {
+ int xx = x + xy[i][0];
+ int yy = y + xy[i][1];
+ int dir = MV_DIR_FROM_BIT(i);
+ int dir_opposite = MV_DIR_OPPOSITE(dir);
+
+ if (IN_LEV_FIELD(xx, yy) && IS_EMC_PILLAR(IntelliDrawBuffer[xx][yy]) &&
+ (pillar_direction_old & dir) &&
+ (getOpenDirectionFromPillar(IntelliDrawBuffer[xx][yy]) & dir_opposite))
+ pillar_direction_new |= dir;
+ }
+
+ return getPillarFromOpenDirectionNotEmpty(pillar_direction_new, element_old);
}
static void SetElementSimple(int x, int y, int element, boolean change_level)
{
+ int sx = x - level_xpos;
+ int sy = y - level_ypos;
+
+ IntelliDrawBuffer[x][y] = element;
+
if (change_level)
Feld[x][y] = element;
- IntelliDrawBuffer[x][y] = element;
+ if (IN_ED_FIELD(sx, sy))
+ DrawMiniElement(sx, sy, element);
+}
- if (IN_ED_FIELD(x - level_xpos, y - level_ypos))
- DrawMiniElement(x - level_xpos, y - level_ypos, element);
+static void MergeAndCloseNeighbourElements(int x1, int y1, int *element1,
+ int x2, int y2, int *element2,
+ int (*close_function)(int, int),
+ boolean change_level)
+{
+ /* set neighbour elements to newly determined connections */
+ SetElementSimple(x1, y1, *element1, change_level);
+ SetElementSimple(x2, y2, *element2, change_level);
+
+ /* remove all open connections of neighbour elements */
+ *element1 = close_function(x1, y1);
+ *element2 = close_function(x2, y2);
+
+ /* set neighbour elements to new, minimized connections */
+ SetElementSimple(x1, y1, *element1, change_level);
+ SetElementSimple(x2, y2, *element2, change_level);
}
static void SetElementIntelliDraw(int x, int y, int new_element,
boolean change_level)
{
+ static int xy[4][2] =
+ {
+ { -1, 0 },
+ { +1, 0 },
+ { 0, -1 },
+ { 0, +1 }
+ };
static int last_x = -1;
static int last_y = -1;
int old_element = IntelliDrawBuffer[x][y];
if (IS_TUBE(new_element))
{
- static int xy[4][2] =
- {
- { -1, 0 },
- { +1, 0 },
- { 0, -1 },
- { 0, +1 }
- };
- boolean last_element_is_neighbour = FALSE;
- int last_element_new;
- int tube_direction = MV_NONE;
+ int last_element_new = EL_UNDEFINED;
+ int direction = MV_NONE;
int i;
/* if existing element is tube, keep all existing tube directions */
if (IS_TUBE(old_element))
- tube_direction |= getDirectionFromTube(old_element);
+ direction |= getOpenDirectionFromTube(old_element);
for (i = 0; i < NUM_DIRECTIONS; i++)
{
int dir = MV_DIR_FROM_BIT(i);
int dir_opposite = MV_DIR_OPPOSITE(dir);
int last_element_old = IntelliDrawBuffer[last_x][last_y];
- int last_direction_old = getDirectionFromTube(last_element_old);
+ int last_direction_old = getOpenDirectionFromTube(last_element_old);
int last_direction_new = last_direction_old | dir_opposite;
- last_element_new = getTubeFromDirection(last_direction_new);
- last_element_is_neighbour = TRUE;
+ last_element_new = getTubeFromOpenDirection(last_direction_new);
- tube_direction |= dir;
+ direction |= dir;
}
}
- new_element = getTubeFromDirectionNotEmpty(tube_direction, new_element);
+ new_element = getTubeFromOpenDirectionNotEmpty(direction, new_element);
+
+ if (last_element_new != EL_UNDEFINED)
+ MergeAndCloseNeighbourElements(x, y, &new_element,
+ last_x, last_y, &last_element_new,
+ getClosedTube, change_level);
+ }
+ else if (IS_BELT(new_element))
+ {
+ int belt_nr = getBeltNrFromBeltElement(new_element);
+ int last_element_new = EL_UNDEFINED;
+ int direction = MV_NONE;
+ int i;
- /* reduce connections of neighbour tube elements to minimal connections */
- if (last_element_is_neighbour)
+ /* if existing element is belt, keep all existing belt directions */
+ if (IS_BELT(old_element))
+ direction |= getOpenDirectionFromBelt(old_element);
+
+ for (i = MV_BIT_LEFT; i <= MV_BIT_RIGHT; i++)
{
- /* set neighbour tube elements to newly determined tube connections */
- SetElementSimple(x, y, new_element, change_level);
- SetElementSimple(last_x, last_y, last_element_new, change_level);
+ int xx = x + xy[i][0];
+ int yy = y + xy[i][1];
- /* remove all open tube connections of neighbour tube elements */
- new_element = getMinimalConnectedTube(x, y);
- last_element_new = getMinimalConnectedTube(last_x, last_y);
+ if (last_x == xx && last_y == yy && IN_LEV_FIELD(last_x, last_y) &&
+ IS_BELT(IntelliDrawBuffer[last_x][last_y]))
+ {
+ int dir = MV_DIR_FROM_BIT(i);
+ int dir_opposite = MV_DIR_OPPOSITE(dir);
+ int last_element_old = IntelliDrawBuffer[last_x][last_y];
+ int last_belt_nr = getBeltNrFromBeltElement(last_element_old);
+ int last_direction_old = getOpenDirectionFromBelt(last_element_old);
+ int last_direction_new = last_direction_old | dir_opposite;
- /* set neighbour tube elements to new, minimized tube connections */
- SetElementSimple(x, y, new_element, change_level);
- SetElementSimple(last_x, last_y, last_element_new, change_level);
+ last_element_new = getBeltFromNrAndOpenDirection(last_belt_nr,
+ last_direction_new);
+ direction |= dir;
+ }
+ }
+
+ new_element = getBeltFromNrAndOpenDirectionNotEmpty(belt_nr, direction,
+ new_element);
+ if (last_element_new != EL_UNDEFINED)
+ MergeAndCloseNeighbourElements(x, y, &new_element,
+ last_x, last_y, &last_element_new,
+ getClosedBelt, change_level);
+ }
+ else if (IS_ACID_POOL_OR_ACID(new_element))
+ {
+ int last_element_new = EL_UNDEFINED;
+ int direction = MV_NONE;
+ int i;
+
+ /* if existing element is pool, keep all existing pool directions */
+ if (IS_ACID_POOL_OR_ACID(old_element))
+ direction |= getOpenDirectionFromPool(old_element);
+
+ for (i = 0; i < NUM_DIRECTIONS; i++)
+ {
+ int xx = x + xy[i][0];
+ int yy = y + xy[i][1];
+
+ if (last_x == xx && last_y == yy && IN_LEV_FIELD(last_x, last_y) &&
+ IS_ACID_POOL_OR_ACID(IntelliDrawBuffer[last_x][last_y]))
+ {
+ int dir = MV_DIR_FROM_BIT(i);
+ int dir_opposite = MV_DIR_OPPOSITE(dir);
+ int last_element_old = IntelliDrawBuffer[last_x][last_y];
+ int last_direction_old = getOpenDirectionFromPool(last_element_old);
+ int last_direction_new = last_direction_old | dir_opposite;
+
+ last_element_new = getPoolFromOpenDirection(last_direction_new);
+
+ direction |= dir;
+ }
+ }
+
+#if 1
+ int foo = last_element_new;
+
+ if (foo == EL_EMPTY)
+ foo = EL_ACID;
+
+ if (last_element_new == EL_EMPTY)
+ last_element_new = old_element;
+
+ if (last_element_new != EL_UNDEFINED)
+ new_element = getPoolFromOpenDirectionNotEmpty(direction,
+ foo);
+ else
+ new_element = getPoolFromOpenDirectionNotEmpty(direction, new_element);
+
+#else
+
+#if 0
+ if (last_element_new == EL_EMPTY)
+ last_element_new = new_element;
+#else
+ if (last_element_new == EL_EMPTY)
+ last_element_new = EL_ACID;
+#endif
+
+#if 1
+ if (last_element_new != EL_UNDEFINED)
+ new_element = getPoolFromOpenDirectionNotEmpty(direction,
+ last_element_new);
+ else
+ new_element = getPoolFromOpenDirectionNotEmpty(direction, new_element);
+#else
+ new_element = getPoolFromOpenDirectionNotEmpty(direction, new_element);
+#endif
+
+#endif
+
+ if (last_element_new != EL_UNDEFINED)
+ MergeAndCloseNeighbourElements(x, y, &new_element,
+ last_x, last_y, &last_element_new,
+ getClosedPool, change_level);
+ }
+ else if (IS_EMC_PILLAR(new_element))
+ {
+ int last_element_new = EL_UNDEFINED;
+ int direction = MV_NONE;
+ int i;
+
+ /* if existing element is pillar, keep all existing pillar directions */
+ if (IS_EMC_PILLAR(old_element))
+ direction |= getOpenDirectionFromPillar(old_element);
+
+ for (i = MV_BIT_UP; i <= MV_BIT_DOWN; i++)
+ {
+ int xx = x + xy[i][0];
+ int yy = y + xy[i][1];
+
+ if (last_x == xx && last_y == yy && IN_LEV_FIELD(last_x, last_y) &&
+ IS_EMC_PILLAR(IntelliDrawBuffer[last_x][last_y]))
+ {
+ int dir = MV_DIR_FROM_BIT(i);
+ int dir_opposite = MV_DIR_OPPOSITE(dir);
+ int last_element_old = IntelliDrawBuffer[last_x][last_y];
+ int last_direction_old = getOpenDirectionFromPillar(last_element_old);
+ int last_direction_new = last_direction_old | dir_opposite;
+
+ last_element_new = getPillarFromOpenDirection(last_direction_new);
+
+ direction |= dir;
+ }
+ }
+
+ new_element = getPillarFromOpenDirectionNotEmpty(direction, new_element);
+
+ if (last_element_new != EL_UNDEFINED)
+ MergeAndCloseNeighbourElements(x, y, &new_element,
+ last_x, last_y, &last_element_new,
+ getClosedPillar, change_level);
+ }
+ else if (IS_BELT_SWITCH(old_element))
+ {
+ int belt_nr = getBeltNrFromBeltSwitchElement(old_element);
+ int belt_dir = getBeltDirFromBeltSwitchElement(old_element);
+
+ belt_dir = (belt_dir == MV_LEFT ? MV_NONE :
+ belt_dir == MV_NONE ? MV_RIGHT : MV_LEFT);
+
+ new_element = getBeltSwitchElementFromBeltNrAndBeltDir(belt_nr, belt_dir);
+ }
+ else
+ {
+ static int swappable_elements[][2] =
+ {
+ { EL_EXIT_CLOSED, EL_EXIT_OPEN },
+ { EL_DYNAMITE, EL_DYNAMITE_ACTIVE },
+ { EL_EM_DYNAMITE, EL_EM_DYNAMITE_ACTIVE },
+ { EL_QUICKSAND_EMPTY, EL_QUICKSAND_FULL },
+ { EL_EMERALD, EL_WALL_EMERALD },
+ { EL_EMERALD_YELLOW, EL_WALL_EMERALD_YELLOW },
+ { EL_EMERALD_RED, EL_WALL_EMERALD_RED },
+ { EL_EMERALD_PURPLE, EL_WALL_EMERALD_PURPLE },
+ { EL_DIAMOND, EL_WALL_DIAMOND },
+ { EL_BD_DIAMOND, EL_WALL_BD_DIAMOND },
+ { EL_GATE_1, EL_GATE_1_GRAY },
+ { EL_GATE_2, EL_GATE_2_GRAY },
+ { EL_GATE_3, EL_GATE_3_GRAY },
+ { EL_GATE_4, EL_GATE_4_GRAY },
+ { EL_EM_GATE_1, EL_EM_GATE_1_GRAY },
+ { EL_EM_GATE_2, EL_EM_GATE_2_GRAY },
+ { EL_EM_GATE_3, EL_EM_GATE_3_GRAY },
+ { EL_EM_GATE_4, EL_EM_GATE_4_GRAY },
+ { EL_EMC_GATE_5, EL_EMC_GATE_5_GRAY },
+ { EL_EMC_GATE_6, EL_EMC_GATE_6_GRAY },
+ { EL_EMC_GATE_7, EL_EMC_GATE_7_GRAY },
+ { EL_EMC_GATE_8, EL_EMC_GATE_8_GRAY },
+ { EL_DC_GATE_WHITE, EL_DC_GATE_WHITE_GRAY },
+ { EL_TIME_ORB_EMPTY, EL_TIME_ORB_FULL },
+ { EL_LAMP, EL_LAMP_ACTIVE },
+ { EL_SOKOBAN_FIELD_EMPTY, EL_SOKOBAN_FIELD_FULL },
+ { EL_SP_BASE, EL_SP_BUGGY_BASE },
+ { EL_PEARL, EL_WALL_PEARL },
+ { EL_CRYSTAL, EL_WALL_CRYSTAL },
+ { EL_TIMEGATE_CLOSED, EL_TIMEGATE_OPEN },
+ { EL_SWITCHGATE_CLOSED, EL_SWITCHGATE_OPEN },
+ { EL_SWITCHGATE_SWITCH_UP, EL_SWITCHGATE_SWITCH_DOWN },
+ { EL_DC_SWITCHGATE_SWITCH_UP, EL_DC_SWITCHGATE_SWITCH_DOWN },
+ { EL_LIGHT_SWITCH, EL_LIGHT_SWITCH_ACTIVE },
+ { EL_LANDMINE, EL_DC_LANDMINE },
+ { EL_SHIELD_NORMAL, EL_SHIELD_DEADLY },
+ { EL_STEEL_EXIT_CLOSED, EL_STEEL_EXIT_OPEN },
+ { EL_EM_EXIT_CLOSED, EL_EM_EXIT_OPEN },
+ { EL_EM_STEEL_EXIT_CLOSED, EL_EM_STEEL_EXIT_OPEN },
+ { EL_QUICKSAND_FAST_EMPTY, EL_QUICKSAND_FAST_FULL },
+
+ { -1, -1 },
+ };
+ int i;
+
+ for (i = 0; swappable_elements[i][0] != -1; i++)
+ {
+ int element1 = swappable_elements[i][0];
+ int element2 = swappable_elements[i][1];
+
+ if (old_element == element1 || old_element == element2)
+ new_element = (old_element == element1 ? element2 : element1);
}
}
static void SetElementExt(int x, int y, int element, boolean change_level)
{
if (element < 0)
- element = IntelliDrawBuffer[x][y] = Feld[x][y];
-
- if (GetKeyModState() & KMOD_Shift)
+ SetElementSimple(x, y, Feld[x][y], change_level);
+ else if (GetKeyModState() & KMOD_Shift)
SetElementIntelliDraw(x, y, element, change_level);
else
SetElementSimple(x, y, element, change_level);
static void DrawLineElement(int sx, int sy, int element, boolean change_level)
{
-#if 1
int lx = sx + level_xpos;
int ly = sy + level_ypos;
SetElementExt(lx, ly, element, change_level);
-
-#else
-
- int lx = sx + level_xpos;
- int ly = sy + level_ypos;
- int element_new = (element < 0 ? Feld[lx][ly] : element);
-
- DrawMiniElement(sx, sy, element_new);
-
- if (change_level)
- Feld[lx][ly] = element;
-#endif
}
static void DrawLine(int from_x, int from_y, int to_x, int to_y,
int element, boolean change_level)
{
+ int xsize = ABS(to_x - from_x);
+ int ysize = ABS(to_y - from_y);
+ int dx = (to_x < from_x ? -1 : +1);
+ int dy = (to_y < from_y ? -1 : +1);
+ int i;
+
if (from_y == to_y) /* horizontal line */
{
- int x;
- int y = from_y;
-
- if (from_x > to_x)
- swap_numbers(&from_x, &to_x);
-
- for (x = from_x; x <= to_x; x++)
- DrawLineElement(x, y, element, change_level);
+ for (i = 0; i <= xsize; i++)
+ DrawLineElement(from_x + i * dx, from_y, element, change_level);
}
else if (from_x == to_x) /* vertical line */
{
- int x = from_x;
- int y;
-
- if (from_y > to_y)
- swap_numbers(&from_y, &to_y);
-
- for (y = from_y; y <= to_y; y++)
- DrawLineElement(x, y, element, change_level);
+ for (i = 0; i <= ysize; i++)
+ DrawLineElement(from_x, from_y + i * dy, element, change_level);
}
else /* diagonal line */
{
- int len_x = ABS(to_x - from_x);
- int len_y = ABS(to_y - from_y);
- int x, y;
-
- if (len_y < len_x) /* a < 1 */
+ if (ysize < xsize) /* a < 1 */
{
- float a = (float)len_y / (float)len_x;
+ float a = (float)ysize / (float)xsize;
- if (from_x > to_x)
- swap_number_pairs(&from_x, &from_y, &to_x, &to_y);
-
- for (x = 0; x <= len_x; x++)
+ for (i = 0; i <= xsize; i++)
{
- y = (int)(a * x + 0.5) * (to_y < from_y ? -1 : +1);
+ int x = dx * i;
+ int y = dy * (int)(a * i + 0.5);
+
DrawLineElement(from_x + x, from_y + y, element, change_level);
}
}
else /* a >= 1 */
{
- float a = (float)len_x / (float)len_y;
+ float a = (float)xsize / (float)ysize;
- if (from_y > to_y)
- swap_number_pairs(&from_x, &from_y, &to_x, &to_y);
-
- for (y = 0; y <= len_y; y++)
+ for (i = 0; i <= ysize; i++)
{
- x = (int)(a * y + 0.5) * (to_x < from_x ? -1 : +1);
+ int x = dx * (int)(a * i + 0.5);
+ int y = dy * i;
+
DrawLineElement(from_x + x, from_y + y, element, change_level);
}
}